How to test the tensile strength of nylon rope wit

2022-08-18
  • Detail

How does the tensile testing machine test the tensile strength of nylon rope

how does the tensile testing machine test the tensile strength of nylon rope

how does the tensile testing machine test the tensile strength of nylon rope? We all know that electronic tension machine is widely used and favored by all industries, and some testing techniques are different. Haida introduced the testing method of shoelaces earlier, and today I will introduce the tensile strength test of nylon rope. The following are the details:

first, test purpose

test the tensile strength of nylon rope

Second, test equipment

1, a nylon rope

2 Electronic tension machine

3. HF Digital push-pull meter (external)

3. Test steps

1. Adjust the equipment horizontally to make it in a horizontal state

2. Check whether the power supply meets the specified requirements

all aluminum car F150 pickup truck jointly developed by Alcoa and Ford 3. Turn on the power switch of the control panel, and at this time, all buttons The indicator light is on and the control appliances of the push-pull meter are in the energized state

4. Select the appropriate test speed

5. Select the appropriate fixture according to the nylon rope, and correctly install the nylon rope test piece (as shown in the above figure)

6. Adjust the upper and lower stroke setting rings to the upper and lower limit positions of the required range

7. Press the start, drop or rise button to make the intermediate coupling plate drop or rise, and start the test, At this time, the display starts to display the tensile value of the nylon rope specimen until the nylon rope specimen is broken or damaged, and the load remains at the minimum value. After recording the value, remove the broken or damaged specimen

8. Clamp the nylon rope specimen according to the above method and the display value returns to zero before retesting. If the test has been completed, please turn off the power

9 and establish a macro-control and market conditioning mechanism Sort out the test results according to the relevant calculation formula

how does the tensile testing machine test the tensile strength of nylon rope? The above is a general operation method of nylon rope. The actual operation may be somewhat different from the written form. If you encounter something you don't understand in the operation, please call Haida instrument. We will serve you wholeheartedly to improve the independent innovation ability and core competitiveness of the industry

article source: Dongguan Haida international instruments is forbidden to reprint without permission! (or: if you need to reprint, indicate the source)

Copyright © 2011 JIN SHI