Flange material classification
650) {this.width=650;} "Title=" flange classification by material "alt=" flange classification by material "/>
flange , also called flange plate or flange plate. The flange is a part that connects the pipes with each other and is connected to the pipe end; The flange on the equipment inlet and outlet is also used for the connection between two equipment, such as the reducer flange. Flange connection or flange joint refers to the connection of flanges, gaskets and bolts as a group For the detachable connection of the specimen and clamping part with the sealing structure, the pipe flange refers to the flange used for piping in the pipeline device, and the flange used on the equipment refers to the inlet and outlet flange of the equipment. There are holes on the flange, and the bolts make the two flanges tight. The advantages of the recycled plastic granulator also make it possible to continue its development. The flanges are sealed with gaskets. The flange is divided into threaded connection (threaded connection) flange, welding flange and clamp flange
reducer flange is used for connection between motor and reducer, and connection between reducer and other equipment
it can be divided into:
wcb (carbon steel), LCB (low temperature carbon steel), LC3 (3.5% nickel steel), wc5 (1.25% chromium 0.5% molybdenum steel), wc9 (2.25% chromium), C5 (5% chromium% molybdenum), C12 (9% chromium 1% molybdenum), ca6nm (4 (12% chromium steel), CA15 (4) (12% chromium), CF8M (316 stainless steel), cf8c (347 stainless steel), CF8 (304 stainless steel), CF3 (304L stainless steel), cf3m (316L stainless steel) Cn7m LCD experiment turns (alloy steel), m (Monel), n7m (Hastelloy b), cw6m (Hastelloy C), cy40 (Inconel)
information source: Longma
LINK
Copyright © 2011 JIN SHI